Thursday, October 7, 2010

diy faraday cage

you'll need the following:

  • tin box
  • plug
  • speaker wire
  • metal mesh (i used a wall patch)
  • heavy duty shears
  • screws + bolts + washers
  • mylar (i used a space blanket)


first thing you should do is prep the plug by removing the un-needed prongs...



next, prep the speaker wire...



mount the speaker wire to the plug like so...



here's what it'll look like when you're done:



next, you'll want to cut a hole in the tin + cover it w/ the metal mesh. luckily, the metal mesh from the wall patch is sticky, which helps hold it in place when you mount it w/ the screws + bolts + washers. you'll also want to stick the exposed speaker wire threads in between the layers of metal mesh, like so...



lastly, you'll want to stuff the box w/ the mylar space blanket to help insulate you little cage:






tah-dah! here's the finished product! pretty f-ing cool, huh? best part about it is it works like a charm! :)

No comments:

Post a Comment